Pride ST 12 Car Subwoofer 5000/10000W €1079.00

1079.00

Handmade Enclosure Car Subwoofer 5000/10000 Watts Pride Car Audio ST-series Dual 0.4-ohm is known to deliver extreme output, crazy dynamics and top-notch sound quality.

1 in stock

Compare
SKU: pride-st-12-04 Category: Tags: ,

Description

Handmade Enclosure Car Subwoofer 5000/10000 Watts Pride Car Audio ST-series Dual 0.4-ohm is known to deliver extreme output, crazy dynamics and top-notch sound quality.

Category: Subwoofer
Weight: 60 kg (132.3 lb)
Dimensions: LWH: 425x425x390 mm (16.7×16.7×15.4 in)
Model: Pride Car Audio ST12

12″ Sub Pride ST12 Key Benefits

COIL

Superior Efficiency Flat Wound Coppered Aluminium CCAW High Temperature Voice Coil

SPIDER

High Excursion Dual Progressive Nomex Spiders

FRAME

Die-Cast Aluminum Frame

CONE

Rigid Real Carbon Cone and Dust Cap

MAGNETS

High Accuracy VMS Vented Ferrite ceramic magnet system

WIRING

Long Life High Temperature Flatwound Aluminum Ribbon Wire

Why ST-series Subwoofer?

  1. Stabilized Rubber Surround for Minimized Acoustic Distortion

  2. Decreased Risk of Overheating

  3. Dual Flat Progressive Spiders

  4. Made of Top Quality materials

  5. Cut down back wave interference

Pride 12″ ST-series Subwoofer Features

COIL

Heat-dissipating, solid pole piece and high-temp coil wire for longer woofer life.

SPIDER

Venting in the back-bracing of the cone and perimeter of the spider landing provides maximum air-flow to cool the voice-coil during operation.

FRAME

The aluminum basket with large foam edge and paper with glass fiber cone.

CONE

Paper-pulp cone – ten times more rigid than a polypropylene cone.

MAGNETS

Optimized motor magnetics with extended pole and bumped vented backplate.

WIRING

Proprietary all metal, radially oriented compression input terminal assembly.

SURROUND

Low damping rubber speaker surround maintains best possible linear movement.

POLE

Vented pole yoke allows better heat dissipation and increased power handling.

The Pride ST12 Subwoofer remarkable performance evolution continues.

To enhance the reliability and performance by reducing fatigue and possible shorting, in the Pride Subwoofer, Pride engineers have stitched the tinsel leads to the spider. The multipoint periodic stitching lead wires reduce the mass of the tinsel leads to spread the stress over a greater area.

Pride ST-series Subwoofer is able to dissipate heat from the voice coil in a most efficient way. A hot voice coil can melt the adhesive bonds, which may lead to eventual woofer failure. The coil former acts as a heat-sink to dissipate thermal build-up on the voice coil cool during high SPL conditions.

  • Heat-dissipating, solid pole piece and high-temp coil wire for longer woofer life.

  • Venting in the back-bracing of the cone and perimeter of the spider landing provides maximum air-flow to cool the voice-coil during operation.

  • The aluminum basket with large foam edge and paper with glass fiber cone.

  • Paper-pulp cone – ten times more rigid than a polypropylene cone.

  • Proprietary all metal, radially oriented compression input terminal assembly.

  • Optimized motor magnetics with extended pole and bumped vented backplate.

  • Low damping rubber speaker surround maintains best possible linear movement.

  • Model: ST
  • Woofer size: 12-inch
  • Voice coil diameter: 102 mm 4-inch
  • Sensitivity (2.83V 1m): 99.01 dB
  • Impedance: Dual 0.4-ohm
  • Peak power (Max): 10000W
  • Power (RMS): 5000W
  • Free air resonance (Fs): 27.01 Hz
  • Excursion (Xmax) one-way BL 50%: 36 mm
  • Voice coil DC resistance (Re): 1.17 ohms
  • Electrical Q value (Qes): 0.20
  • Mechanical Q value (Qms): 4.48
  • Total speaker Q value (Qts): 0.19
  • Equivalent compliance (Vas): 80.62 L (2726 oz)
  • Efficiency (SPL 1W 1m): 90.65 dB
  • Cone area (Sd): 887 sq cm (137.49 cu in)
  • Moving mass (Mms): 481.1 g (17 oz)
  • Force Factor (BL): 21.6
  • Zmax: 26.81
  • Voice coil material: High Temperature Copper
  • Suggested sealed: 0.05 m3 (1.77 cu ft)
  • Suggested ported: 0.07 m3 (2.47 cu ft) port 225.8 cm2 (35 sq in) length 44.5 cm (17.5 in)
  • Outer Frame Dimension: 336 mm (13.2-inch)
  • Frame material: Heavy duty die cast aluminum

Shop with confidence and take advantage of

Full manufacturer’s warranty for one year

  1. 30-Day money-back guarantee

  2. Premium hand-made build quality

  3. No questions asked easy returns

  4. Customer service by phone/email

Pride ST12D04 is hand-built weather-proof and tough as nails

Operating conditions
Humidity up to 90% (normal/salt-fog)
Storage temperature -20°C to 50°C (-4°F to 122°F)
Working temperature 5°C to 40°C ( 4°F to 104°F)

Additional information

Weight 60 kg
Dimensions 42.5 × 42.5 × 39 cm
model

ST

size

12

voice-coil-diameter

102mm 4"

voice-coil-material

High Temperature Copper

sensitivity-2-dot-83v-1m

99.01 dB

Impedance

Dual 0.4-ohm

peak-power-max

10000W

RMS

5000W

outer-frame-dimension

336 mm (13.2")

sealed-enclosure

0.05 m3 (1.77 cu ft)

ported-enclosure

0.07 m3 (2.47 cu ft) port 225.8 cm2 (35 sq in) length 44.5 cm (17.5 in)

free-air-resonance-fs

27.01 Hz

voice-coil-dc-resistance-re

1.17 ohms

linear-excursion-xmax

36 mm

Qes

0.20

Qms

4.48

Qts

0.19

force-factor-bl

21.6

equivalent-compliance-vas

80.62 L (2726 oz)

sensitivity-1w-1m

90.65 dB

sd-effective-piston-area

887 cm² (137.49 sq in)

moving-mass-mms

481.1 g (17 oz)

zmax-impedance-at-resonance

26.81

shipping-label

HP

brand

Pride Car Audio

google-product-category

2833