Pride MT 15 Car Subwoofer 1250/3500W €354.00

354.00

A phenomenal excursion capability is delivered by hand-built 1250W RMS – 3500W Max Power High SPL Pride Dual 1.6-ohm Subwoofer in order to extract maximum performance potential.

8 in stock

Compare
SKU: pride-mt-15-16 Category: Tags: ,

Description

A phenomenal excursion capability is delivered by hand-built 1250W RMS – 3500W Max Power High SPL Pride MT Subwoofer in order to extract maximum performance potential.

Dual Voice Coil Car Subwoofer

Weight: 16 kg (35.3 lb)
Dimensions: LWH: 395x395x230 mm (15.6×15.6×9.1 in)
Model: Pride MT 15

Pride MT 15 Key Benefits

COIL

Superior Finish High Temperature Aluminium CCAW Voice Coil

SPIDER

Long-Lasting Nomex Progressive Spiders

FRAME

Die-Cast Aluminum Frame

CONE

High modulus Real Carbon Cone and Dust Cap

MAGNETS

Hi-Energy VMS Vented Ferrite ceramic magnet system

WIRING

Long Life High Temperature Round wound Aluminum Ribbon Wire

Why Pride MT Subwoofer?

  1. Cut down back wave interference

  2. Integrated Tinsel Leads

  3. Dual Flat Progressive Spiders

  4. Impressive Power Handling

  5. Decreased Inductive Distortion

Pride 15″ MT Subwoofer Features

COIL

High temperature voice coil with spunlaced nomex insulating reinforcement collar.

SPIDER

Large spider excursion for louder bass and less distortion.

FRAME

Built with rugged cast Aluminium frame for dimensional stability and to eliminate stray magnetic fields for improved magnetic focus.

CONE

Reliable stitched surround for for more strength and cone flex minimizing.

MAGNETS

Optimized high power motor structure.

WIRING

Wiring and installation is made easier with one-sided terminals.

SURROUND

Nitrile Butadiene Rubber NBR surround for improved transient response.

POLE

Flared rear vented pole piece for lower back pressure and better air flow to improve power handling and lower vent noise.

Enjoy the remarkable performance of Pride MT-series Subwoofer and a great bargain.

Pride Subwoofer is able to dissipate heat from the voice coil in a most efficient way. A hot voice coil can melt the adhesive bonds, which may lead to eventual woofer failure. The coil former acts as a heat-sink to dissipate thermal build-up on the voice coil cool during high SPL conditions.

To enhance the reliability and performance by reducing fatigue and possible shorting, in the Pride Subwoofer, Pride engineers have stitched the tinsel leads to the spider. The multipoint periodic stitching lead wires reduce the mass of the tinsel leads to spread the stress over a greater area.

  • High-temp voice coil with spun-laced nomex re-inforcement collar made with ultra high temperature UHT glue.

  • Large spider excursion for louder bass and less distortion.

  • Built with rugged cast Aluminium frame for dimensional stability and to eliminate stray magnetic fields for improved magnetic focus.

  • Reliable stitched surround for for more strength and cone flex minimizing.

  • Wiring and installation is made easier with one-sided terminals.

  • Optimized high power motor structure.

  • Nitrile Butadiene Rubber NBR surround for improved transient response.

  • Model: MT
  • Woofer size: 15-inch
  • Voice coil diameter: 76 mm 3-inch
  • Sensitivity (2.83V 1m): 87.5 dB
  • Impedance: Dual 1.6-ohm
  • Peak power (Max): 3500W
  • Power (RMS): 1250W
  • Free air resonance (Fs): 28 Hz
  • Excursion (Xmax) one-way BL 50%: 19 mm
  • Voice coil DC resistance (Re): 3.2 ohms
  • Total speaker Q value (Qts): 0.35
  • Equivalent compliance (Vas): 70 L (2367 oz)
  • Efficiency (SPL 1W 1m): 90 dB
  • Cone area (Sd): 790 sq cm (122.45 cu in)
  • Force Factor (BL): 22
  • Voice coil material: High Temperature Copper
  • Suggested sealed: 0.07 m3 (2.47 cu ft)
  • Suggested ported: 0.1 m3 (3.53 cu ft) port 300 cm2 (46.5 sq in) length 45.72 cm (18 in)
  • Frame material: Heavy duty die cast aluminum

Shop with confidence and take advantage of

555 Days of Coverage

New customers of mobileaudio.eu validate for extended warranty of 555 days

Full warranty for more than 18 months!

  1. 30-Day money-back guarantee

  2. Premium hand-made build quality

  3. No questions asked easy returns

  4. Customer service by phone/email

Pride MT15 is hand-built weather-proof and tough as nails

Operating conditions
Humidity up to 90% (normal/salt-fog)
Storage temperature -20°C to 50°C (-4°F to 122°F)
Working temperature 5°C to 40°C ( 4°F to 104°F)

Additional information

Weight 16 kg
Dimensions 44 × 44 × 27 cm
model

MT

size

15

voice-coil-diameter

76mm 3"

voice-coil-material

High Temperature Copper

sensitivity-2-dot-83v-1m

87.5 dB

Impedance

Dual 1.6-ohm

peak-power-max

3500W

RMS

1250W

sealed-enclosure

0.07 m3 (2.47 cu ft)

ported-enclosure

0.1 m3 (3.53 cu ft) port 300 cm2 (46.5 sq in) length 45.72 cm (18 in)

free-air-resonance-fs

28 Hz

linear-excursion-xmax

19 mm

voice-coil-dc-resistance-re

3.2 ohms

Qts

0.35

equivalent-compliance-vas

70 L (2367 oz)

sensitivity-1w-1m

90 dB

sd-effective-piston-area

790 cm² (122.45 sq in)

force-factor-bl

22

frame-material

Heavy duty die cast aluminum

shipping-label

XL

brand

Pride Car Audio

google-product-category

2833

You may also like…