Pride T 18 Car Subwoofer 2500/5000W €599.00

 599.00

A phenomenal excursion capability is delivered by hand-built Subwoofer Pride Car Audio T-series Competition Dual 0.8-ohm 2500/5000 Watts in order to extract maximum performance potential.

+ Compare
SKU: pride-t-18-08 Category: Tags: ,

Description

A phenomenal excursion capability is delivered by hand-built Subwoofer Pride Car Audio T-series Competition Dual 0.8-ohm 2500/5000 Watts in order to extract maximum performance potential.

Category: Subwoofer
Weight: 32 kg (70.5 lb)
Dimensions: LWH: 535x535x360 mm (21.1×21.1×14.2 in)
Model: Pride Car Audio T18

18″ Sub Pride T18 Key Benefits

COIL

Precision designed High Temperature Aluminium CCAW Voice Coil

SPIDER

Durable Oversized Dual Poly-Nomex Spiders

FRAME

Cast Aluminum Basket

CONE

Rigid Real Carbon Cone and Dust Cap

MAGNETS

High Quality VMS Vented Ferrite ceramic magnet system

WIRING

Long Life High Temperature Round wound Aluminum Ribbon Wire

Why T-series Subwoofer?

  1. Dual Flat Progressive Spiders

  2. Improved High-end Extension

  3. Designed for Competition SPLs

  4. Enhanced Thermal Capacity and Mech Strength

  5. Stabilized Rubber Surround for Minimized Acoustic Distortion

Pride 18″ T-series Subwoofer Features

COIL

Longer voice coil made with ultra high temperature UHT glue for increased xmax.

SPIDER

Spider plateau venting cooling system.

FRAME

The aluminum basket with large foam edge and paper with glass fiber cone.

CONE

The cone design, adding targeted strength for reliable performance and sharp response.

MAGNETS

Optimized high power motor structure.

WIRING

Pair of wire terminals custom designed for shallow mount installations.

SURROUND

High excursion EROM foam surround for improved transient response.

POLE

Extended copper sleeve on pole piece for low inductance and low distortion.

The Pride Subwoofer remarkable performance evolution continues.

To enhance the reliability and performance by reducing fatigue and possible shorting, in the Pride T18 Subwoofer, Pride engineers have stitched the tinsel leads to the spider. The multipoint periodic stitching lead wires reduce the mass of the tinsel leads to spread the stress over a greater area.

By using an , the Pride T-series Subwoofer is able to dissipate heat from the voice coil in a most efficient way. A hot voice coil can melt the adhesive bonds, which may lead to eventual woofer failure. The coil former acts as a heat-sink to dissipate thermal build-up on the voice coil cool during high SPL conditions.

  • Longer voice coil made with ultra high temperature UHT glue for increased xmax.

  • Spider plateau venting cooling system.

  • The aluminum basket with large foam edge and paper with glass fiber cone.

  • The cone design, adding targeted strength for reliable performance and sharp response.

  • Pair of wire terminals custom designed for shallow mount installations.

  • Optimized high power motor structure.

  • High excursion EROM foam surround for improved transient response.

  • Model: T
  • Woofer size: 18-inch
  • Voice coil diameter: 76 mm 3-inch
  • Sensitivity (2.83V 1m): 94.2 dB
  • Impedance: Dual 0.8-ohm
  • Peak power (Max): 5000W
  • Power (RMS): 2500W
  • Free air resonance (Fs): 27 Hz
  • Excursion (Xmax) one-way BL 50%: 33 mm
  • Voice coil DC resistance (Re): 3.3 ohms
  • Total speaker Q value (Qts): 0.34
  • Equivalent compliance (Vas): 120 L (4057.7 oz)
  • Efficiency (SPL 1W 1m): 90.4 dB
  • Cone area (Sd): 1165 sq cm (180.6 cu in)
  • Force Factor (BL): 29.5
  • Voice coil material: High Temperature Copper
  • Suggested sealed: 0.1 m3 (3.53 cu ft)
  • Suggested ported: 0.15 m3 (5.29 cu ft) port 432.3 cm2 (67 sq in) length 50.8 cm (20 in)
  • Frame material: Heavy duty die cast aluminum

Shop with confidence and take advantage of

Full manufacturer’s warranty for one year

  1. 30-Day money-back guarantee

  2. Premium hand-made build quality

  3. No questions asked easy returns

  4. Customer service by phone/email

Pride T18D08 is hand-built weather-proof and tough as nails

Operating conditions
Humidity up to 90% (normal/salt-fog)
Storage temperature -20°C to 50°C (-4°F to 122°F)
Working temperature 5°C to 40°C ( 4°F to 104°F)

Additional information

Weight 32 kg
Dimensions 53.5 × 53.5 × 36 cm
Model

Woofer size

Voice coil diameter

76mm 3"

Voice coil material

High Temperature Copper

Sensitivity (2.83V/1m)

94.2 dB

Impedance

Dual 0.8-ohm

Peak power (Max)

5000W

Power (RMS)

2500W

Free air resonance (Fs)

27 Hz

Excursion (Xmax) one-way BL 50%

33 mm

Voice coil DC resistance (Re)

3.3 ohms

Total speaker Q value (Qts)

0.34

Equivalent compliance (Vas)

120 L (4057.7 oz)

Efficiency (SPL 1W/1m)

90.4 dB

Cone area (Sd)

1165 cm² (180.6 sq in)

Force Factor (BL)

29.5

Suggested sealed

0.1 m3 (3.53 cu ft)

Suggested ported

0.15 m3 (5.29 cu ft) port 432.3 cm2 (67 sq in) length 50.8 cm (20 in)

Shipping label

HP

Brand

Pride Car Audio

Google product category

2833

Leave a Review

Rating
Please select a star rating
Please write a review

Connect with

Facebook Twitter