Pride T 15 Car Subwoofer 2500/5000W €565.00

 565.00

A phenomenal excursion capability is delivered by hand-built 2500W RMS – 5000 Max Power Component Pride Dual 0.8-ohm Subwoofer in order to extract maximum performance potential.

+ Compare
SKU: pride-t-15-08 Category: Tags: ,

Description

A phenomenal excursion capability is delivered by hand-built 2500W RMS – 5000W Max Power Component Pride Dual 0.8-ohm Subwoofer in order to extract maximum performance potential.

Category: Subwoofer
Weight: 31 kg (68.3 lb)
Dimensions: LWH: 445x445x325 mm (17.5×17.5×12.8 in)
Model: Pride Car Audio T15

15″ Sub Pride T15 Key Benefits

COIL

Enhanced Cooling system Flat Wound Coppered Aluminium CCAW High Temperature Voice Coil

SPIDER

Multi-layer Progressive Spiders with stiched-on Tinsel Leads

FRAME

Die-Cast Aluminum Frame

CONE

High modulus Real Carbon Cone and Dust Cap

MAGNETS

High Quality VMS Vented Ferrite ceramic magnet system

WIRING

Heavy-Duty High Temperature Round wound Aluminum Ribbon Wire

Why T-series Subwoofer?

  1. Perimeter Venting for optimal temperature

  2. Decreased Inductive Distortion

  3. Decreased Risk of Overheating

  4. Improved Cone Control

  5. Designed for Competition SPLs

Pride 15″ T-series Subwoofer Features

COIL

Heat-dissipating, solid pole piece and high-temp coil wire for longer woofer life.

SPIDER

Lead wire woven into spider for added strength.

FRAME

Built with rugged cast Aluminium frame for dimensional stability and to eliminate stray magnetic fields for improved magnetic focus.

CONE

Reliable stitched surround for for more strength and cone flex minimizing.

MAGNETS

Optimized motor magnetics with extended pole and bumped vented backplate.

WIRING

PSP “Parallel Series Parallel” terminal for easy wiring and impedance selection.

SURROUND

NT multilayer high density foam surround with nylon stitching.

POLE

Low carbon steel top plates and one piece packplate/pole pieces.

Absolutely. Positively. Perfect. Pride Subwoofer.

To increase the surface area of the cone (Sd), which is actually , Pride T-series Subwoofer features a new way for the surround to adhere to the basket, gaining up to 25% more effective radiating cone area, and seriously improving the nominal efficiency and maximum output.

To enhance the reliability and performance by reducing fatigue and possible shorting, in the Pride T-series Subwoofer, Pride engineers have stitched the tinsel leads to the spider. The multipoint periodic stitching lead wires reduce the mass of the tinsel leads to spread the stress over a greater area.

  • Heat-dissipating, solid pole piece and high-temp coil wire for longer woofer life.

  • Lead wire woven into spider for added strength.

  • Built with rugged cast Aluminium frame for dimensional stability and to eliminate stray magnetic fields for improved magnetic focus.

  • Reliable stitched surround for for more strength and cone flex minimizing.

  • PSP “Parallel Series Parallel” terminal for easy wiring and impedance selection.

  • Optimized motor magnetics with extended pole and bumped vented backplate.

  • NT multilayer high density foam surround with nylon stitching.

  • Model: T
  • Woofer size: 15-inch
  • Voice coil diameter: 76 mm 3-inch
  • Sensitivity (2.83V 1m): 95.6 dB
  • Impedance: Dual 0.8-ohm
  • Peak power (Max): 5000W
  • Power (RMS): 2500W
  • Free air resonance (Fs): 29 Hz
  • Excursion (Xmax) one-way BL 50%: 33 mm
  • Voice coil DC resistance (Re): 3.3 ohms
  • Total speaker Q value (Qts): 0.32
  • Equivalent compliance (Vas): 70 L (2367 oz)
  • Efficiency (SPL 1W 1m): 88.7 dB
  • Cone area (Sd): 865 sq cm (134.1 cu in)
  • Force Factor (BL): 29.5
  • Voice coil material: High Temperature Copper
  • Suggested sealed: 0.07 m3 (2.47 cu ft)
  • Suggested ported: 0.12 m3 (4.23 cu ft) port 322.58 cm2 (50 sq in) length 45.72 cm (18 in)
  • Frame material: Heavy duty die cast aluminum

Shop with confidence and take advantage of

Full manufacturer’s warranty for one year

  1. 30-Day money-back guarantee

  2. Premium hand-made build quality

  3. No questions asked easy returns

  4. Customer service by phone/email

Pride T15D08 is hand-built weather-proof and tough as nails

Operating conditions
Humidity up to 90% (normal/salt-fog)
Storage temperature -20°C to 50°C (-4°F to 122°F)
Working temperature 5°C to 40°C ( 4°F to 104°F)

Additional information

Weight 31 kg
Dimensions 44.5 × 44.5 × 32.5 cm
Model

Woofer size

Voice coil diameter

76mm 3"

Voice coil material

High Temperature Copper

Sensitivity (2.83V/1m)

95.6 dB

Impedance

Dual 0.8-ohm

Peak power (Max)

5000W

Power (RMS)

2500W

Suggested sealed

0.07 m3 (2.47 cu ft)

Suggested ported

0.12 m3 (4.23 cu ft) port 322.58 cm2 (50 sq in) length 45.72 cm (18 in)

Free air resonance (Fs)

29 Hz

Excursion (Xmax) one-way BL 50%

33 mm

Voice coil DC resistance (Re)

3.3 ohms

Total speaker Q value (Qts)

0.32

Equivalent compliance (Vas)

70 L (2367 oz)

Efficiency (SPL 1W/1m)

88.7 dB

Cone area (Sd)

865 cm² (134.1 sq in)

Force Factor (BL)

29.5

Shipping label

XL

Brand

Pride Car Audio

Google product category

2833

Leave a Review

Rating
Please select a star rating
Please write a review

Connect with

Facebook Twitter