Pride T 12 Car Subwoofer 2500/5000W €549.00

 549.00

Hand-made 2500W RMS – 5000W Max Power Competition Pride Dual 1.65-ohm Subwoofer delivers minimal distortion low bass impact.

In stock

+ Compare
SKU: pride-t-12-16 Category: Tags: ,

Description

Hand-made 2500W RMS – 5000W Max Power Competition Pride Dual 1.65-ohm Subwoofer delivers minimal distortion low bass impact.

Category: Subwoofer
Weight: 31 kg (68.3 lb)
Dimensions: LWH: 365x365x310 mm (14.4×14.4×12.2 in)
Model: Pride Car Audio T12

12″ Sub Pride T12 Key Benefits

COIL

Improved Power Delivery High Temperature Aluminium CCAW Voice Coil

SPIDER

Long-Lasting Nomex Progressive Spiders

FRAME

Cast Aluminum Basket

CONE

High modulus Real Carbon Cone and Dust Cap

MAGNETS

High-Energy VMS Vented Ferrite ceramic magnet system

WIRING

Heavy-Duty High Temperature Round wound Aluminum Ribbon Wire

Why T-series Subwoofer?

  1. Oversized Suspension System

  2. Integrated Tinsel Leads

  3. Perimeter Venting for optimal temperature

  4. Reduced Basket Resonation

  5. Made of Top Quality materials

Pride 12″ T-series Subwoofer Features

COIL

High-temp voice coil with spun-laced nomex re-inforcement collar made with ultra high temperature UHT glue.

SPIDER

Each Pride subwoofer features a progressive spider, applying progressively more force as the cone travel approaches its limit.

FRAME

Built with rugged cast Aluminium frame for dimensional stability and to eliminate stray magnetic fields for improved magnetic focus.

CONE

Stitched cone for added durability.

MAGNETS

Optimized motor magnetics with extended pole and bumped vented backplate.

WIRING

Custom 10-AWG nickel plated push terminals.

SURROUND

NT multilayer high density foam surround with nylon stitching.

POLE

Vented pole yoke allows better heat dissipation and increased power handling.

There is always a reason to buy Pride T-series Subwoofer, an excellent performing car audio component.

To increase the surface area of the cone (Sd), which is actually , Pride T12 Subwoofer features a new way for the surround to adhere to the basket, gaining up to 25% more effective radiating cone area, and seriously improving the nominal efficiency and maximum output.

To enhance the reliability and performance by reducing fatigue and possible shorting, in the Pride T12 Subwoofer, Pride engineers have stitched the tinsel leads to the spider. The multipoint periodic stitching lead wires reduce the mass of the tinsel leads to spread the stress over a greater area.

  • High-temp voice coil with spun-laced nomex re-inforcement collar made with ultra high temperature UHT glue.

  • Each Pride subwoofer features a progressive spider, applying progressively more force as the cone travel approaches its limit.

  • Built with rugged cast Aluminium frame for dimensional stability and to eliminate stray magnetic fields for improved magnetic focus.

  • Stitched cone for added durability.

  • Custom 10-AWG nickel plated push terminals.

  • Optimized motor magnetics with extended pole and bumped vented backplate.

  • NT multilayer high density foam surround with nylon stitching.

  • Model: T
  • Woofer size: 12-inch
  • Voice coil diameter: 76 mm 3-inch
  • Sensitivity (2.83V 1m): 90.5 dB
  • Impedance: Dual 1.65-ohm
  • Peak power (Max): 5000W
  • Power (RMS): 2500W
  • Free air resonance (Fs): 30 Hz
  • Excursion (Xmax) one-way BL 50%: 33 mm
  • Voice coil DC resistance (Re): 3.3 ohms
  • Total speaker Q value (Qts): 0.26
  • Equivalent compliance (Vas): 28.5 L (963.7 oz)
  • Efficiency (SPL 1W 1m): 87 dB
  • Cone area (Sd): 515 sq cm (79.8 cu in)
  • Force Factor (BL): 29.1
  • Voice coil material: High Temperature Copper
  • Suggested sealed: 0.05 m3 (1.77 cu ft)
  • Suggested ported: 0.07 m3 (2.47 cu ft) port 225.8 cm2 (35 sq in) length 44.5 cm (17.5 in)
  • Frame material: Heavy duty die cast aluminum

Shop with confidence and take advantage of

Full manufacturer’s warranty for one year

  1. 30-Day money-back guarantee

  2. Premium hand-made build quality

  3. No questions asked easy returns

  4. Customer service by phone/email

Pride T12D16 is hand-built weather-proof and tough as nails

Operating conditions
Humidity up to 90% (normal/salt-fog)
Storage temperature -20°C to 50°C (-4°F to 122°F)
Working temperature 5°C to 40°C ( 4°F to 104°F)

Additional information

Weight 31 kg
Dimensions 36.5 × 36.5 × 31 cm
Model

Woofer size

Voice coil diameter

76mm 3"

Voice coil material

High Temperature Copper

Sensitivity (2.83V/1m)

90.5 dB

Impedance

Dual 1.65-ohm

Peak power (Max)

5000W

Power (RMS)

2500W

Suggested sealed

0.05 m3 (1.77 cu ft)

Suggested ported

0.07 m3 (2.47 cu ft) port 225.8 cm2 (35 sq in) length 44.5 cm (17.5 in)

Free air resonance (Fs)

30 Hz

Excursion (Xmax) one-way BL 50%

33 mm

Voice coil DC resistance (Re)

3.3 ohms

Total speaker Q value (Qts)

0.26

Equivalent compliance (Vas)

28.5 L (963.7 oz)

Efficiency (SPL 1W/1m)

87 dB

Cone area (Sd)

515 cm² (79.8 sq in)

Force Factor (BL)

29.1

Shipping label

XL

Brand

Pride Car Audio

Google product category

2833

Leave a Review

Rating
Please select a star rating
Please write a review

Connect with

Facebook Twitter