Pride T 12 Car Subwoofer 2500/5000W €549.00

 549.00

Being the result of a huge development, the Subwoofer Pride Car Audio T-series Low Bass Dual 0.8-ohm 2500/5000 Watts features only the best materials and premium build quality.

In stock

+ Compare
SKU: pride-t-12-08 Category: Tags: ,

Description

Being the result of a huge development, the ride T-series Low Bass Dual 0.8-ohm 2500/5000 Watts Subwoofer features only the best materials and premium build quality.

Category: Subwoofer
Weight: 31 kg (68.3 lb)
Dimensions: LWH: 365x365x310 mm (14.4×14.4×12.2 in)
Model: Pride Car Audio T12

12″ Sub Pride T12 Key Benefits

COIL

Enhanced Cooling system Flat Wound Coppered Aluminium CCAW High Temperature Voice Coil

SPIDER

High Excursion Flat PolyCotton spiders

FRAME

Die-Cast Aluminum Frame

CONE

Rigid Real Carbon Cone and Dust Cap

MAGNETS

High Performance VMS Vented Ferrite ceramic magnet system

WIRING

Heavy-Duty High Temperature Round wound Aluminum Ribbon Wire

Why T-series Subwoofer?

  1. Lab tuned parameters guarantee you the top-notch audiophile quality

  2. Improved High-end Extension

  3. Perimeter Venting for optimal temperature

  4. Enhanced Thermal Capacity and Mech Strength

  5. Improved Excursion with the new Suspension

Pride 12″ T-series Subwoofer Features

COIL

Longer voice coil made with ultra high temperature UHT glue for increased xmax.

SPIDER

Progressive-roll spider keeps stress away from the glue joint of the spider landing for long-lasting reliability.

FRAME

Low turbulence cast Aluminum Basket improves airflow to reduce compression of the motor structure.

CONE

Woven fiber pressed paper cone helps reproduce tight and accurate bass with minimal cone distortion.

MAGNETS

These full size magnets yield much higher motor force than most of the competition.

WIRING

Custom 10-AWG nickel plated push terminals.

SURROUND

High density rubber foam surround with nylon stitching.

POLE

Pride Subwoofers now feature a pole piece extended above the magnet’s top plate.

Discover the difference with Pride Subwoofer, a new level in audio quality, power and impact.

To increase the surface area of the cone (Sd), which is actually , Pride Subwoofer features a new way for the surround to adhere to the basket, gaining up to 25% more effective radiating cone area, and seriously improving the nominal efficiency and maximum output.

Pride T12 Subwoofer is able to dissipate heat from the voice coil in a most efficient way. A hot voice coil can melt the adhesive bonds, which may lead to eventual woofer failure. The coil former acts as a heat-sink to dissipate thermal build-up on the voice coil cool during high SPL conditions.

  • Longer voice coil made with ultra high temperature UHT glue for increased xmax.

  • Progressive-roll spider keeps stress away from the glue joint of the spider landing for long-lasting reliability.

  • Low turbulence cast Aluminum Basket improves airflow to reduce compression of the motor structure.

  • Woven fiber pressed paper cone helps reproduce tight and accurate bass with minimal cone distortion.

  • Custom 10-AWG nickel plated push terminals.

  • These full size magnets yield much higher motor force than most of the competition.

  • High density rubber foam surround with nylon stitching.

  • Model: T
  • Woofer size: 12-inch
  • Voice coil diameter: 76 mm 3-inch
  • Sensitivity (2.83V 1m): 90.5 dB
  • Impedance: Dual 0.8-ohm
  • Peak power (Max): 5000W
  • Power (RMS): 2500W
  • Free air resonance (Fs): 30 Hz
  • Excursion (Xmax) one-way BL 50%: 33 mm
  • Voice coil DC resistance (Re): 3.3 ohms
  • Total speaker Q value (Qts): 0.26
  • Equivalent compliance (Vas): 28.5 L (963.7 oz)
  • Efficiency (SPL 1W 1m): 87 dB
  • Cone area (Sd): 515 sq cm (79.8 cu in)
  • Force Factor (BL): 29.1
  • Voice coil material: High Temperature Copper
  • Suggested sealed: 0.05 m3 (1.77 cu ft)
  • Suggested ported: 0.07 m3 (2.47 cu ft) port 225.8 cm2 (35 sq in) length 44.5 cm (17.5 in)
  • Frame material: Heavy duty die cast aluminum

Shop with confidence and take advantage of

Full manufacturer’s warranty for one year

  1. 30-Day money-back guarantee

  2. Premium hand-made build quality

  3. No questions asked easy returns

  4. Customer service by phone/email

Pride T12D08 is hand-built weather-proof and tough as nails

Operating conditions
Humidity up to 90% (normal/salt-fog)
Storage temperature -20°C to 50°C (-4°F to 122°F)
Working temperature 5°C to 40°C ( 4°F to 104°F)

Additional information

Weight 31 kg
Dimensions 36.5 × 36.5 × 31 cm
Model

Woofer size

Voice coil diameter

76mm 3"

Voice coil material

High Temperature Copper

Sensitivity (2.83V/1m)

90.5 dB

Impedance

Dual 0.8-ohm

Peak power (Max)

5000W

Power (RMS)

2500W

Suggested sealed

0.05 m3 (1.77 cu ft)

Suggested ported

0.07 m3 (2.47 cu ft) port 225.8 cm2 (35 sq in) length 44.5 cm (17.5 in)

Free air resonance (Fs)

30 Hz

Excursion (Xmax) one-way BL 50%

33 mm

Voice coil DC resistance (Re)

3.3 ohms

Total speaker Q value (Qts)

0.26

Equivalent compliance (Vas)

28.5 L (963.7 oz)

Efficiency (SPL 1W/1m)

87 dB

Cone area (Sd)

515 cm² (79.8 sq in)

Force Factor (BL)

29.1

Shipping label

XL

Brand

Pride Car Audio

Google product category

2833

Leave a Review

Rating
Please select a star rating
Please write a review

Connect with

Facebook Twitter