Pride ST 12 Car Subwoofer 5000/10000W €1079.00

 1079.00

Hand-made Subwoofer Pride Car Audio ST-series Competition Dual 0.7-ohm 5000/10000 Watts delivers minimal distortion low bass impact.

In stock

+ Compare
SKU: pride-st-12-07 Category: Tags: ,

Description

Hand-made Subwoofer Pride Car Audio ST-series Competition Dual 0.7-ohm 5000/10000 Watts delivers minimal distortion low bass impact.

Category: Subwoofer
Weight: 60 kg (132.3 lb)
Dimensions: LWH: 425x425x390 mm (16.7×16.7×15.4 in)
Model: Pride Car Audio ST12

12″ Sub Pride ST12 Key Benefits

COIL

Optimised Cooling Flat Wound Coppered Aluminium CCAW High Temperature Voice Coil

SPIDER

High Excursion Dual Progressive Nomex Spiders

FRAME

Die-Cast Aluminum Frame

CONE

Rigid Real Carbon Cone and Dust Cap

MAGNETS

High Accuracy VMS Vented Ferrite ceramic magnet system

WIRING

Heavy-Duty High Temperature Flatwound Aluminum Ribbon Wire

Why ST-series Subwoofer?

  1. Enhanced Thermal Capacity and Mech Strength

  2. Impressive Power Handling

  3. Dual Flat Progressive Spiders

  4. Oversized Suspension System

  5. Perimeter Venting for optimal temperature

Pride 12″ ST-series Subwoofer Features

COIL

High-temp voice coil with spun-laced nomex re-inforcement collar made with ultra high temperature UHT glue.

SPIDER

Heavy-duty speaker leads are stitched and glued to the spider rolls for reliable performance when pushed to the limits.

FRAME

Rigid die-cast chassis with aerodynamically shaped ribs.

CONE

Stitched cone for added durability.

MAGNETS

Rubber magnet cover protects the magnet during handling and provides a clean appearance.

WIRING

Wiring and installation is made easier with one-sided terminals.

SURROUND

NT multilayer high density foam surround with nylon stitching.

POLE

Flared rear vented pole piece for lower back pressure and better air flow to improve power handling and lower vent noise.

Pride ST-series Subwoofer is an attractive buy, very well built for its price.

Pride ST-series Subwoofer is able to dissipate heat from the voice coil in a most efficient way. A hot voice coil can melt the adhesive bonds, which may lead to eventual woofer failure. The coil former acts as a heat-sink to dissipate thermal build-up on the voice coil cool during high SPL conditions. To enhance the reliability and performance by reducing fatigue and possible shorting, in the Pride ST12 Subwoofer, Pride engineers have stitched the tinsel leads to the spider. The multipoint periodic stitching lead wires reduce the mass of the tinsel leads to spread the stress over a greater area.

  • High-temp voice coil with spun-laced nomex re-inforcement collar made with ultra high temperature UHT glue.

  • Heavy-duty speaker leads are stitched and glued to the spider rolls for reliable performance when pushed to the limits.

  • Rigid die-cast chassis with aerodynamically shaped ribs.

  • Stitched cone for added durability.

  • Wiring and installation is made easier with one-sided terminals.

  • Rubber magnet cover protects the magnet during handling and provides a clean appearance.

  • NT multilayer high density foam surround with nylon stitching.

  • Model: ST
  • Woofer size: 12-inch
  • Voice coil diameter: 102 mm 4-inch
  • Sensitivity (2.83V 1m): 99.01 dB
  • Impedance: Dual 0.7-ohm
  • Peak power (Max): 10000W
  • Power (RMS): 5000W
  • Free air resonance (Fs): 27.01 Hz
  • Voice coil DC resistance (Re): 1.17 ohms
  • Electrical Q value (Qes): 0.20
  • Mechanical Q value (Qms): 4.48
  • Total speaker Q value (Qts): 0.19
  • Equivalent compliance (Vas): 80.62 L (2726 oz)
  • Efficiency (SPL 1W 1m): 90.65 dB
  • Cone area (Sd): 887 sq cm (137.49 cu in)
  • Moving mass (Mms): 481.1 g (17 oz)
  • Force Factor (BL): 21.60
  • Zmax: 26.81
  • Voice coil material: High Temperature Copper
  • Suggested sealed: 0.05 m3 (1.77 cu ft)
  • Suggested ported: 0.07 m3 (2.47 cu ft) port 225.8 cm2 (35 sq in) length 44.5 cm (17.5 in)
  • Outer Frame Dimension: 336 mm (13.2-inch)
  • Frame material: Heavy duty die cast aluminum

Shop with confidence and take advantage of

Full manufacturer’s warranty for one year

  1. 30-Day money-back guarantee

  2. Premium hand-made build quality

  3. No questions asked easy returns

  4. Customer service by phone/email

Pride ST12D07 is hand-built weather-proof and tough as nails

Operating conditions
Humidity up to 90% (normal/salt-fog)
Storage temperature -20°C to 50°C (-4°F to 122°F)
Working temperature 5°C to 40°C ( 4°F to 104°F)

Additional information

Weight 60 kg
Dimensions 42.5 × 42.5 × 39 cm
Model

Woofer size

Voice coil diameter

102mm 4"

Voice coil material

High Temperature Copper

Sensitivity (2.83V/1m)

99.01 dB

Impedance

Dual 0.7-ohm

Peak power (Max)

10000W

Power (RMS)

5000W

Outer Frame Dimension

336 mm (13.2")

Suggested sealed

0.05 m3 (1.77 cu ft)

Suggested ported

0.07 m3 (2.47 cu ft) port 225.8 cm2 (35 sq in) length 44.5 cm (17.5 in)

Free air resonance (Fs)

27.01 Hz

Voice coil DC resistance (Re)

1.17 ohms

Electrical Q value (Qes)

0.20

Mechanical Q value (Qms)

4.48

Total speaker Q value (Qts)

0.19

Equivalent compliance (Vas)

80.62 L (2726 oz)

Efficiency (SPL 1W/1m)

90.65 dB

Cone area (Sd)

887 cm² (137.49 sq in)

Moving mass (Mms)

481.1 g (17 oz)

Force Factor (BL)

21.60

Zmax

26.81

Shipping label

HP

Brand

Pride Car Audio

Google product category

2833

Leave a Review

Rating
Please select a star rating
Please write a review

Connect with

Facebook Twitter