Pride S 18 Car Subwoofer 4000/8000W €845.00

 845.00

A phenomenal excursion capability is delivered by hand-built 4000W RMS – 8000W Max Power Enclosure Pride Dual 1.6-ohm Subwoofer in order to extract maximum performance potential.

+ Compare
SKU: pride-s-18-16 Category: Tags: ,

Description

A phenomenal excursion capability is delivered by hand-built 4000W RMS – 8000W Max Power Enclosure Pride Dual 1.6-ohm Subwoofer in order to extract maximum performance potential.

Category: Subwoofer
Weight: 40 kg (88.2 lb)
Dimensions: LWH: 535x535x405 mm (21.1×21.1×15.9 in)
Model: Pride Car Audio S18

18″ Sub Pride S18 Key Benefits

COIL

Enhanced Cooling system High Temperature Copper long Voice Coil

SPIDER

Multi-layer Dual Nomex Poly-Cotton Spiders

FRAME

Cast Aluminum Basket

CONE

Lightweight and stiff Real Carbon Cone and Dust Cap

MAGNETS

High Performance VMS Vented Ferrite ceramic magnet system

WIRING

Long Life High Temperature Flatwound Aluminum Ribbon Wire

Why S-series Subwoofer?

  1. Made of Top Quality materials

  2. Improved High-end Extension

  3. Reduced Basket Resonation

  4. Dual Flat Progressive Spiders

  5. Designed for Precise, Powerful Bass

Pride 18″ S-series Subwoofer Features

COIL

Heat-dissipating, solid pole piece and high-temp coil wire for longer woofer life.

SPIDER

Asymmetrical linear drive system with flat progressive spider.

FRAME

Die-cast aluminium basket for solid sounds under all conditions.

CONE

Nomex reinforced paper cone with industrial textured finish.

MAGNETS

Rubber magnet cover protects the magnet during handling and provides a clean appearance.

WIRING

Proprietary all metal, radially oriented compression input terminal assembly.

SURROUND

NT multilayer high density foam surround with nylon stitching.

POLE

Extended pole piece with flared venting.

Absolutely. Positively. Perfect. Pride S-series Subwoofer.

To increase the surface area of the cone (Sd), which is actually , Pride Subwoofer features a new way for the surround to adhere to the basket, gaining up to 25% more effective radiating cone area, and seriously improving the nominal efficiency and maximum output.

Pride S-series Subwoofer is able to dissipate heat from the voice coil in a most efficient way. A hot voice coil can melt the adhesive bonds, which may lead to eventual woofer failure. The coil former acts as a heat-sink to dissipate thermal build-up on the voice coil cool during high SPL conditions.

  • Heat-dissipating, solid pole piece and high-temp coil wire for longer woofer life.

  • Asymmetrical linear drive system with flat progressive spider.

  • Die-cast aluminium basket for solid sounds under all conditions.

  • Nomex reinforced paper cone with industrial textured finish.

  • Multipoint periodic stitched lead wire technique reduces the mass of each tinsel lead and spreads stress and strain over a greater area, significantly improving the reliability and performance of the subwoofer.

  • Rubber magnet cover protects the magnet during handling and provides a clean appearance.

  • NT multilayer high density foam surround with nylon stitching.

  • Model: S
  • Woofer size: 18-inch
  • Voice coil diameter: 102 mm 4-inch
  • Impedance: Dual 1.6-ohm
  • Peak power (Max): 8000W
  • Power (RMS): 4000W
  • Free air resonance (Fs): 22 Hz
  • Excursion (Xmax) one-way BL 50%: 36 mm
  • Voice coil DC resistance (Re): 3.6 ohms
  • Total speaker Q value (Qts): 0.32
  • Equivalent compliance (Vas): 190 L (6424.7 oz)
  • Efficiency (SPL 1W 1m): 90 dB
  • Cone area (Sd): 1320 sq cm (204.6 cu in)
  • Force Factor (BL): 30
  • Voice coil material: High Temperature Copper
  • Suggested sealed: 0.1 m3 (3.53 cu ft)
  • Suggested ported: 0.15 m3 (5.29 cu ft) port 432.3 cm2 (67 sq in) length 50.8 cm (20 in)
  • Frame material: Heavy duty die cast aluminum

Shop with confidence and take advantage of

Full manufacturer’s warranty for one year

  1. 30-Day money-back guarantee

  2. Premium hand-made build quality

  3. No questions asked easy returns

  4. Customer service by phone/email

Pride S18D16 is hand-built weather-proof and tough as nails

Operating conditions
Humidity up to 90% (normal/salt-fog)
Storage temperature -20°C to 50°C (-4°F to 122°F)
Working temperature 5°C to 40°C ( 4°F to 104°F)

Additional information

Weight 40 kg
Dimensions 53.5 × 53.5 × 40.5 cm
Model

Woofer size

Voice coil diameter

102mm 4"

Voice coil material

High Temperature Copper

Impedance

Dual 1.6-ohm

Peak power (Max)

8000W

Power (RMS)

4000W

Suggested sealed

0.1 m3 (3.53 cu ft)

Suggested ported

0.15 m3 (5.29 cu ft) port 432.3 cm2 (67 sq in) length 50.8 cm (20 in)

Free air resonance (Fs)

22 Hz

Excursion (Xmax) one-way BL 50%

36 mm

Voice coil DC resistance (Re)

3.6 ohms

Total speaker Q value (Qts)

0.32

Equivalent compliance (Vas)

190 L (6424.7 oz)

Efficiency (SPL 1W/1m)

90 dB

Cone area (Sd)

1320 cm² (204.6 sq in)

Force Factor (BL)

30

Shipping label

HP

Brand

Pride Car Audio

Google product category

2833

Leave a Review

Rating
Please select a star rating
Please write a review

Connect with

Facebook Twitter