Pride S 12 Car Subwoofer 4000/8000W €729.00

 729.00

With Low Bass Car Subwoofer 4000/8000 Watts Pride Car Audio S-series Dual 1.6-ohm your car sound system could respond to uber low frequencies most subwoofers regretfully miss.

+ Compare
SKU: pride-s-12-16 Category: Tags: , ,

Description

With Low Bass Car Subwoofer 4000/8000 Watts Pride Car Audio S-series Dual 1.6-ohm your car sound system could respond to uber low frequencies most subwoofers regretfully miss, giving you a tight and full-bodied bass!

Category: Subwoofer
Weight: 37 kg (81.6 lb)
Dimensions: LWH: 365x365x310 mm (14.4×14.4×12.2 in)
Model: Pride Car Audio S12

12″ Sub Pride S12 Key Benefits

COIL

Improved Linearity Flat Wound Coppered Aluminium CCAW High Temperature Voice Coil

SPIDER

Durable Flat PolyCotton spiders

FRAME

Die-Cast Aluminum Frame

CONE

High modulus Real Carbon Cone and Dust Cap

MAGNETS

High-Energy VMS Vented Ferrite ceramic magnet system

WIRING

Heavy-Duty High Temperature Flatwound Aluminum Ribbon Wire

Why S-series Subwoofer?

  1. Improved Cone Control

  2. Improved High-end Extension

  3. Stabilized Rubber Surround for Minimized Acoustic Distortion

  4. Designed for Competition SPLs

  5. Impressive Power Handling

Pride 12″ S-series Subwoofer Features

COIL

Extended pole piece for uniform magnetic fringe field flux as well as more efficient heat sinking of the voice coil in both movement directions.

SPIDER

Inside the subwoofer, the poly-cotton, progressive-roll spider supplies substantial stability for the loudest bass possible, externally, a ribbed Santoprene surround protects the cone during max excursion.

FRAME

The aluminum basket with large foam edge and paper with glass fiber cone.

CONE

360-degree constant-contact back bracing adheres directly to every contour of the cone.

MAGNETS

These full size magnets yield much higher motor force than most of the competition.

WIRING

Large binding posts for heavy gauge wire.

SURROUND

High density rubber foam surround with nylon stitching.

POLE

Vented pole yoke allows better heat dissipation and increased power handling.

Pride S12 Subwoofer is an attractive buy, very well built for its price.

To enhance the reliability and performance by reducing fatigue and possible shorting, in the Pride Subwoofer, Pride engineers have stitched the tinsel leads to the spider. The multipoint periodic stitching lead wires reduce the mass of the tinsel leads to spread the stress over a greater area.

To increase the surface area of the cone (Sd), which is actually , Pride S-series Subwoofer features a new way for the surround to adhere to the basket, gaining up to 25% more effective radiating cone area, and seriously improving the nominal efficiency and maximum output.

  • Extended pole piece for uniform magnetic fringe field flux as well as more efficient heat sinking of the voice coil in both movement directions.

  • The aluminum basket effectively dissipates heat.

  • 360-degree constant-contact back bracing adheres directly to every contour of the cone.

  • Large binding posts for heavy gauge wire.

  • These full size magnets yield much higher motor force than most of the competition.

  • Handmade nylon-stitched high-roll foam surround delivers improved linearity and MORE output.

  • Model: S
  • Woofer size: 12-inch
  • Voice coil diameter: 102 mm 4-inch
  • Sensitivity (2.83V 1m): 92.5 dB
  • Impedance: Dual 1.6-ohm
  • Peak power (Max): 8000W
  • Power (RMS): 4000W
  • Free air resonance (Fs): 30 Hz
  • Excursion (Xmax) one-way BL 50%: 36 mm
  • Voice coil DC resistance (Re): 3.2 ohms
  • Total speaker Q value (Qts): 0.27
  • Equivalent compliance (Vas): 29 L (980.6 oz)
  • Efficiency (SPL 1W 1m): 86.5 dB
  • Cone area (Sd): 565 sq cm (87.6 cu in)
  • Force Factor (BL): 30
  • Voice coil material: High Temperature Copper
  • Suggested sealed: 0.05 m3 (1.77 cu ft)
  • Suggested ported: 0.07 m3 (2.47 cu ft) port 225.8 cm2 (35 sq in) length 44.5 cm (17.5 in)
  • Frame material: Heavy duty die cast aluminum

Shop with confidence and take advantage of

Full manufacturer’s warranty for one year

  1. 30-Day money-back guarantee

  2. Premium hand-made build quality

  3. No questions asked easy returns

  4. Customer service by phone/email

Pride S12D16 is hand-built weather-proof and tough as nails

Operating conditions
Humidity up to 90% (normal/salt-fog)
Storage temperature -20°C to 50°C (-4°F to 122°F)
Working temperature 5°C to 40°C ( 4°F to 104°F)

Additional information

Weight 37 kg
Dimensions 36.5 × 36.5 × 31 cm
Model

Woofer size

Voice coil diameter

102mm 4"

Voice coil material

High Temperature Copper

Sensitivity (2.83V/1m)

92.5 dB

Impedance

Dual 1.6-ohm

Peak power (Max)

8000W

Power (RMS)

4000W

Suggested sealed

0.05 m3 (1.77 cu ft)

Suggested ported

0.07 m3 (2.47 cu ft) port 225.8 cm2 (35 sq in) length 44.5 cm (17.5 in)

Free air resonance (Fs)

30 Hz

Excursion (Xmax) one-way BL 50%

36 mm

Voice coil DC resistance (Re)

3.2 ohms

Total speaker Q value (Qts)

0.27

Equivalent compliance (Vas)

29 L (980.6 oz)

Efficiency (SPL 1W/1m)

86.5 dB

Cone area (Sd)

565 cm² (87.6 sq in)

Force Factor (BL)

30

Shipping label

HP

Brand

Pride Car Audio

Google product category

2833

Leave a Review

Rating
Please select a star rating
Please write a review

Connect with

Facebook Twitter