Pride S 12 Car Subwoofer 4000/8000W €729.00

 729.00

A phenomenal excursion capability is delivered by hand-built 4000W RMS – 8000W Max Power High SPL Pride Dual 0.7-ohm Subwoofer in order to extract maximum performance potential.

In stock

+ Compare
SKU: pride-s-12-07 Category: Tags: ,

Description

A phenomenal excursion capability is delivered by hand-built 4000W RMS – 8000W Max Power High SPL Pride Dual 0.7-ohm Subwoofer in order to extract maximum performance potential.

Category: Subwoofer
Weight: 37 kg (81.6 lb)
Dimensions: LWH: 365x365x310 mm (14.4×14.4×12.2 in)
Model: Pride Car Audio S12

12″ Sub Pride S12 Key Benefits

COIL

Longer Performance life High Temperature Aluminium CCAW Voice Coil

SPIDER

Durable Flat PolyCotton spiders

FRAME

Cast Aluminum Basket

CONE

Lightweight and stiff Real Carbon Cone and Dust Cap

MAGNETS

High Quality VMS Vented Ferrite ceramic magnet system

WIRING

Heavy-Duty High Temperature Flatwound Aluminum Ribbon Wire

Why S-series Subwoofer?

  1. Cut down back wave interference

  2. Designed for Competition SPLs

  3. Perimeter Venting for optimal temperature

  4. Improved High-end Extension

  5. Dual Flat Progressive Spiders

Pride 12″ S-series Subwoofer Features

COIL

Direct input wires connection to voice coils.

SPIDER

Asymmetrical linear drive system with flat progressive spider.

FRAME

3D cast design like crazy increases the strength and toughness of the basket.

CONE

Large roll surround for generous amounts of excursion.

MAGNETS

These full size magnets yield much higher motor force than most of the competition.

WIRING

Speaker leads are stitched and glued to the spider rolls for reliable performance when pushed to the limits.

SURROUND

Nitrile Butadiene Rubber NBR surround for improved transient response.

POLE

Extended pole yoke improves linearity during long excursion.

Pride S-series Subwoofer is an attractive buy, very well built for its price.

By using an , the Pride Subwoofer is able to dissipate heat from the voice coil in a most efficient way. A hot voice coil can melt the adhesive bonds, which may lead to eventual woofer failure. The coil former acts as a heat-sink to dissipate thermal build-up on the voice coil cool during high SPL conditions.

To increase the surface area of the cone (Sd), which is actually , Pride S-series Subwoofer features a new way for the surround to adhere to the basket, gaining up to 25% more effective radiating cone area, and seriously improving the nominal efficiency and maximum output.

  • Direct input wires connection to voice coils.

  • Asymmetrical linear drive system with flat progressive spider.

  • 3D cast design like crazy increases the strength and toughness of the basket.

  • Large roll surround for generous amounts of excursion.

  • Speaker leads are stitched and glued to the spider rolls for reliable performance when pushed to the limits.

  • These full size magnets yield much higher motor force than most of the competition.

  • Nitrile Butadiene Rubber NBR surround for improved transient response.

  • Model: S
  • Woofer size: 12-inch
  • Voice coil diameter: 102 mm 4-inch
  • Sensitivity (2.83V 1m): 92.5 dB
  • Impedance: Dual 0.7-ohm
  • Peak power (Max): 8000W
  • Power (RMS): 4000W
  • Free air resonance (Fs): 30 Hz
  • Excursion (Xmax) one-way BL 50%: 36 mm
  • Voice coil DC resistance (Re): 3.6 ohms
  • Total speaker Q value (Qts): 0.27
  • Equivalent compliance (Vas): 29 L (980.6 oz)
  • Efficiency (SPL 1W 1m): 86.5 dB
  • Cone area (Sd): 565 sq cm (87.6 cu in)
  • Force Factor (BL): 30
  • Voice coil material: High Temperature Copper
  • Suggested sealed: 0.05 m3 (1.77 cu ft)
  • Suggested ported: 0.07 m3 (2.47 cu ft) port 225.8 cm2 (35 sq in) length 44.5 cm (17.5 in)
  • Frame material: Heavy duty die cast aluminum

Shop with confidence and take advantage of

Full manufacturer’s warranty for one year

  1. 30-Day money-back guarantee

  2. Premium hand-made build quality

  3. No questions asked easy returns

  4. Customer service by phone/email

Pride S12D07 is hand-built weather-proof and tough as nails

Operating conditions
Humidity up to 90% (normal/salt-fog)
Storage temperature -20°C to 50°C (-4°F to 122°F)
Working temperature 5°C to 40°C ( 4°F to 104°F)

Additional information

Weight 37 kg
Dimensions 36.5 × 36.5 × 31 cm
Model

Woofer size

Voice coil diameter

102mm 4"

Voice coil material

High Temperature Copper

Sensitivity (2.83V/1m)

92.5 dB

Impedance

Dual 0.9-ohm

Peak power (Max)

8000W

Power (RMS)

4000W

Suggested sealed

0.05 m3 (1.77 cu ft)

Suggested ported

0.07 m3 (2.47 cu ft) port 225.8 cm2 (35 sq in) length 44.5 cm (17.5 in)

Free air resonance (Fs)

30 Hz

Excursion (Xmax) one-way BL 50%

36 mm

Voice coil DC resistance (Re)

3.6 ohms

Total speaker Q value (Qts)

0.27

Equivalent compliance (Vas)

29 L (980.6 oz)

Efficiency (SPL 1W/1m)

86.5 dB

Cone area (Sd)

565 cm² (87.6 sq in)

Force Factor (BL)

30

Shipping label

HP

Brand

Pride Car Audio

Google product category

2833

Leave a Review

Rating
Please select a star rating
Please write a review

Connect with

Facebook Twitter