Pride MT 15 Car Subwoofer 1750/3500W €354.00

 354.00

Hand-made High Excursion Car Subwoofer 1750/3500 Watts Pride Car Audio MT-series Dual 0.8-ohm delivers minimal distortion low bass impact.

In stock

+ Compare
SKU: pride-mt-15-08 Category: Tags: ,

Description

Hand-made High Excursion Car Subwoofer 1750/3500 Watts Pride Car Audio MT-series Dual 0.8-ohm delivers minimal distortion low bass impact.

Category: Subwoofer
Weight: 16 kg (35.3 lb)
Dimensions: LWH: 395x395x230 mm (15.6×15.6×9.1 in)
Model: Pride Car Audio MT15

15″ Sub Pride MT15 Key Benefits

COIL

Longer Performance life Flat Wound Coppered Aluminium CCAW High Temperature Voice Coil

SPIDER

Durable Dual Progressive Spiders with stiched Tinsel Leads

FRAME

Cast Aluminum Basket

CONE

Rigid Real Carbon Cone and Dust Cap

MAGNETS

High Performance VMS Vented Ferrite ceramic magnet system

WIRING

Long Life High Temperature Round wound Aluminum Ribbon Wire

Why MT-series Subwoofer?

  1. Cut down back wave interference

  2. Decreased Risk of Overheating

  3. Made of Top Quality materials

  4. Oversized Suspension System

  5. Dual Flat Progressive Spiders

Pride 15″ MT-series Subwoofer Features

COIL

Longer voice coil made with ultra high temperature UHT glue for increased xmax.

SPIDER

Spider ring design increases linear position of spider.

FRAME

Low turbulence cast Aluminum Basket improves airflow to reduce compression of the motor structure.

CONE

Injection-molded cone design, adding direct strength for reliable performance and accurate response.

MAGNETS

These full size magnets yield much higher motor force than most of the competition.

WIRING

Wiring and installation is made easier with one-sided terminals.

SURROUND

High density rubber foam surround with nylon stitching.

POLE

Extended copper sleeve on pole piece for low inductance and low distortion.

Save money on Pride MT15 Subwoofer, you will get great performance and a great bargain.

To enhance the reliability and performance by reducing fatigue and possible shorting, in the Pride Subwoofer, Pride engineers have stitched the tinsel leads to the spider. The multipoint periodic stitching lead wires reduce the mass of the tinsel leads to spread the stress over a greater area.

By using an , the Pride MT15 Subwoofer is able to dissipate heat from the voice coil in a most efficient way. A hot voice coil can melt the adhesive bonds, which may lead to eventual woofer failure. The coil former acts as a heat-sink to dissipate thermal build-up on the voice coil cool during high SPL conditions.

  • Longer voice coil made with ultra high temperature UHT glue for increased xmax.

  • Spider ring design increases linear position of spider.

  • Low turbulence cast Aluminum Basket improves airflow to reduce compression of the motor structure.

  • Injection-molded cone design, adding direct strength for reliable performance and accurate response.

  • Wiring and installation is made easier with one-sided terminals.

  • These full size magnets yield much higher motor force than most of the competition.

  • High density rubber foam surround with nylon stitching.

  • Model: MT
  • Woofer size: 15-inch
  • Voice coil diameter: 76 mm 3-inch
  • Sensitivity (2.83V 1m): 93.8 dB
  • Impedance: Dual 0.8-ohm
  • Peak power (Max): 3500W
  • Power (RMS): 1750W
  • Free air resonance (Fs): 28 Hz
  • Excursion (Xmax) one-way BL 50%: 19 mm
  • Voice coil DC resistance (Re): 3.2 ohms
  • Total speaker Q value (Qts): 0.34
  • Equivalent compliance (Vas): 70 L (2367 oz)
  • Efficiency (SPL 1W 1m): 90 dB
  • Cone area (Sd): 790 sq cm (122.45 cu in)
  • Force Factor (BL): 26
  • Voice coil material: High Temperature Copper
  • Suggested sealed: 0.07 m3 (2.47 cu ft)
  • Suggested ported: 0.1 m3 (3.53 cu ft) port 300 cm2 (46.5 sq in) length 45.72 cm (18 in)
  • Frame material: Heavy duty die cast aluminum

Shop with confidence and take advantage of

Full manufacturer’s warranty for one year

  1. 30-Day money-back guarantee

  2. Premium hand-made build quality

  3. No questions asked easy returns

  4. Customer service by phone/email

Pride MT15D08 is hand-built weather-proof and tough as nails

Operating conditions
Humidity up to 90% (normal/salt-fog)
Storage temperature -20°C to 50°C (-4°F to 122°F)
Working temperature 5°C to 40°C ( 4°F to 104°F)

Additional information

Weight 16 kg
Dimensions 44 × 44 × 27 cm
Model

Woofer size

Voice coil diameter

76mm 3"

Voice coil material

High Temperature Copper

Sensitivity (2.83V/1m)

93.8 dB

Impedance

Dual 0.8-ohm

Peak power (Max)

3500W

Power (RMS)

1750W

Suggested sealed

0.07 m3 (2.47 cu ft)

Suggested ported

0.1 m3 (3.53 cu ft) port 300 cm2 (46.5 sq in) length 45.72 cm (18 in)

Free air resonance (Fs)

28 Hz

Excursion (Xmax) one-way BL 50%

19 mm

Voice coil DC resistance (Re)

3.2 ohms

Total speaker Q value (Qts)

0.34

Equivalent compliance (Vas)

70 L (2367 oz)

Efficiency (SPL 1W/1m)

90 dB

Cone area (Sd)

790 cm² (122.45 sq in)

Force Factor (BL)

26

Shipping label

XL

Brand

Pride Car Audio

Google product category

2833

Leave a Review

Rating
Please select a star rating
Please write a review

Connect with

Facebook Twitter