Pride MT 12 Car Subwoofer 1750/3500W €335.00

 335.00

Handmade Competition Car Subwoofer 1750/3500 Watts Pride Car Audio MT-series Dual 0.8-ohm is known to deliver extreme output, crazy dynamics and top-notch sound quality.

In stock

+ Compare
SKU: pride-mt-12-08 Category: Tags: ,

Description

Handmade Competition Car Subwoofer 1750/3500 Watts Pride Car Audio MT-series Dual 0.8-ohm is known to deliver extreme output, crazy dynamics and top-notch sound quality.

Category: Subwoofer
Weight: 15 kg (33.1 lb)
Dimensions: LWH: 320x320x194 mm (12.6×12.6×7.6 in)
Model: Pride Car Audio MT12

12″ Sub Pride MT12 Key Benefits

COIL

Superior Finish High Temperature Aluminium CCAW Voice Coil

SPIDER

High Excursion Oversized Dual Poly-Nomex Spiders

FRAME

Cast Aluminum Basket

CONE

High modulus Real Carbon Cone and Dust Cap

MAGNETS

Massive VMS Vented Ferrite ceramic magnet system

WIRING

Long Life High Temperature Round wound Aluminum Ribbon Wire

Why MT-series Subwoofer?

  1. Stabilized Rubber Surround for Minimized Acoustic Distortion

  2. Impressive Power Handling

  3. Improved Excursion with the new Suspension

  4. Enhanced Thermal Capacity and Mech Strength

  5. Cut down back wave interference

Pride 12″ MT-series Subwoofer Features

COIL

The new pride subwoofers feature longer coils made with ultra high temperature UHT glue.

SPIDER

Heavy-duty speaker leads are stitched and glued to the spider rolls for reliable performance when pushed to the limits.

FRAME

Die-cast aluminium basket for solid sounds under all conditions.

CONE

Large roll surround for generous amounts of excursion.

MAGNETS

Custom tooled rubber gasket and magnet boot for the sharpest perfomance.

WIRING

Proprietary all metal, radially oriented compression input terminal assembly.

SURROUND

Soft low damping rubber surround for improved transient response.

POLE

Vented pole yoke allows better heat dissipation and increased power handling.

Pride MT-series Subwoofer is an attractive buy, very well built for its price.

To enhance the reliability and performance by reducing fatigue and possible shorting, in the Pride MT12 Subwoofer, Pride engineers have stitched the tinsel leads to the spider. The multipoint periodic stitching lead wires reduce the mass of the tinsel leads to spread the stress over a greater area. To increase the surface area of the cone (Sd), which is actually , Pride Subwoofer features a new way for the surround to adhere to the basket, gaining up to 25% more effective radiating cone area, and seriously improving the nominal efficiency and maximum output.

  • The new pride subwoofers feature longer coils made with ultra high temperature UHT glue.

  • Heavy-duty speaker leads are stitched and glued to the spider rolls for reliable performance when pushed to the limits.

  • Die-cast aluminium basket for solid sounds under all conditions.

  • Large roll surround for generous amounts of excursion.

  • Proprietary all metal, radially oriented compression input terminal assembly.

  • Custom tooled rubber gasket and magnet boot for the sharpest perfomance.

  • Rubber multiradius symmetrical highroll foam surround.

  • Model: MT
  • Woofer size: 12-inch
  • Voice coil diameter: 76 mm 3-inch
  • Sensitivity (2.83V 1m): 89.6 dB
  • Impedance: Dual 0.8-ohm
  • Peak power (Max): 3500W
  • Power (RMS): 1750W
  • Free air resonance (Fs): 27 Hz
  • Excursion (Xmax) one-way BL 50%: 24 mm
  • Voice coil DC resistance (Re): 3.2 ohms
  • Total speaker Q value (Qts): 0.27
  • Equivalent compliance (Vas): 27 L (913 oz)
  • Efficiency (SPL 1W 1m): 86 dB
  • Cone area (Sd): 480 sq cm (74.4 cu in)
  • Force Factor (BL): 26
  • Voice coil material: High Temperature Copper
  • Suggested sealed: 0.05 m3 (1.77 cu ft)
  • Suggested ported: 0.06 m3 (2.12 cu ft) port 200 cm2 (31 sq in) length 44.5 cm (17.5 in)
  • Cutout diameter: 282 mm (11.1-inch)
  • Mounting depth: 165 mm (6.5-inch)
  • Outer Frame Dimension: 336 mm (13.2-inch)
  • Frame material: Heavy duty die cast aluminum

Shop with confidence and take advantage of

Full manufacturer’s warranty for one year

  1. 30-Day money-back guarantee

  2. Premium hand-made build quality

  3. No questions asked easy returns

  4. Customer service by phone/email

Pride Pride MT12D08 is hand-built weather-proof and tough as nails

Operating conditions
Humidity up to 90% (normal/salt-fog)
Storage temperature -20°C to 50°C (-4°F to 122°F)
Working temperature 5°C to 40°C ( 4°F to 104°F)

Additional information

Weight 15 kg
Dimensions 36 × 36 × 24 cm
Model

Woofer size

Voice coil diameter

76mm 3"

Voice coil material

High Temperature Copper

Sensitivity (2.83V/1m)

89.6 dB

Impedance

Dual 0.8-ohm

Peak power (Max)

3500W

Power (RMS)

1750W

Outer Frame Dimension

336 mm (13.2")

Cutout diameter

282 mm (11.1")

Mounting depth

165 mm (6.5")

Suggested sealed

0.05 m3 (1.77 cu ft)

Suggested ported

0.06 m3 (2.12 cu ft) port 200 cm2 (31 sq in) length 44.5 cm (17.5 in)

Free air resonance (Fs)

27 Hz

Excursion (Xmax) one-way BL 50%

24 mm

Voice coil DC resistance (Re)

3.2 ohms

Total speaker Q value (Qts)

0.27

Equivalent compliance (Vas)

27 L (913 oz)

Efficiency (SPL 1W/1m)

86 dB

Cone area (Sd)

480 cm² (74.4 sq in)

Force Factor (BL)

26

Shipping label

L

Brand

Pride Car Audio

Google product category

2833

Leave a Review

Rating
Please select a star rating
Please write a review

Connect with

Facebook Twitter