Pride Junior 12 Car Subwoofer 650/1300W €145.00

 145.00

With Subwoofer Pride Car Audio Junior-series Component Dual 1.8-ohm 650/1300 Watts your car sound system could respond to uber low frequencies most subwoofers regretfully miss.

+ Compare
SKU: pride-junior-12-18 Category: Tags: ,

Description

With Subwoofer Pride Car Audio Junior-series ComponentDual 1.8-ohm 650/1300 Watts your car sound system could respond to uber low frequencies most subwoofers regretfully miss.

Category: Subwoofer
Weight: 9 kg (19.8 lb)
Dimensions: LWH: 360x360x240 mm (14.2×14.2×9.4 in)
Model: Pride Car Audio J12

12″ Sub Pride J12 Key Benefits

COIL

Superior Efficiency Flat Wound Coppered Aluminium CCAW High Temperature Voice Coil

SPIDER

Multi-layered Oversized Dual Poly-Nomex Spiders

FRAME

Custom-build Steel Basket

CONE

Lightweight and stiff Real Carbon Cone and Dust Cap

MAGNETS

High Accuracy Double Stacked ceramic Ferrite magnet structures

WIRING

Heavy-Duty High Temperature Round wound Aluminum Ribbon Wire

Why Junior-series Subwoofer?

  1. Reduced Basket Resonation

  2. Improved Cone Control

  3. Designed for Competition SPLs

  4. Oversized Suspension System

  5. Impressive Power Handling

Pride 12″ J-series Subwoofer Features

COIL

Elevated frame cooling brings air directly to the voice coil.

SPIDER

Each Pride subwoofer features a progressive spider, applying progressively more force as the cone travel approaches its limit.

FRAME

Low turbulence cast stamped steel basket improves airflow to reduce compression of the motor structure.

CONE

Nomex reinforced paper cone with industrial textured finish.

MAGNETS

Rubber magnet cover protects the magnet during handling and provides a clean appearance.

WIRING

Pair of wire terminals custom designed for shallow mount installations.

SURROUND

Rubber multiradius symmetrical highroll foam surround.

POLE

Extended pole yoke improves linearity during long excursion.

Pride J12 Subwoofer is an attractive buy, very well built for its price.

To increase the surface area of the cone (Sd), which is actually , Pride Subwoofer features a new way for the surround to adhere to the basket, gaining up to 25% more effective radiating cone area, and seriously improving the nominal efficiency and maximum output.

To enhance the reliability and performance by reducing fatigue and possible shorting, in the Pride Subwoofer, Pride engineers have stitched the tinsel leads to the spider. The multipoint periodic stitching lead wires reduce the mass of the tinsel leads to spread the stress over a greater area.

  • Elevated frame cooling brings air directly to the voice coil.

  • Each Pride subwoofer features a progressive spider, applying progressively more force as the cone travel approaches its limit. Progressive-roll spider keeps stress away from the glue joint of the spider landing for long-lasting reliability.

  • Low turbulence cast stamped steel basket improves airflow to reduce compression of the motor structure. Rigid steel die-cast chassis with aerodynamically shaped ribs.

  • Nomex reinforced paper cone with industrial textured finish.

  • Pair of wire terminals custom designed for shallow mount installations. Proprietary all metal, radially oriented compression input terminal assembly.

  • Rubber magnet cover protects the magnet during handling and provides a clean appearance. These full size magnets yield much higher motor force than most of the competition.

  • Rubber multiradius symmetrical highroll foam surround.

  • Model: Junior
  • Woofer size: 12-inch
  • Voice coil diameter: 66 mm 2.6″
  • Sensitivity (2.83V 1m): 90 dB
  • Impedance: Dual 1.8-ohm
  • Peak power (Max): 1300W
  • Power (RMS): 650W
  • Magnet weight: 3620 g (127.7 oz)
  • Free air resonance (Fs): 30 Hz
  • Excursion (Xmax) one-way BL 50%: 18 mm
  • Voice coil DC resistance (Re): 3.8 ohms
  • Total speaker Q value (Qts): 0.43
  • Equivalent compliance (Vas): 51 L (1724.52 oz)
  • Efficiency (SPL 1W 1m): 87 dB
  • Cone area (Sd): 480 sq cm (74.4 cu in)
  • Force Factor (BL): 17.8
  • Voice coil material: High Temperature Copper
  • Magnet material: high quality ferrite cores
  • Suggested sealed: 0.05 m3 (1.77 cu ft)
  • Suggested ported: 0.06 m3 (2.12 cu ft) port 200 cm2 (31 sq in) length 44.5 cm (17.5 in)
  • Cutout diameter: 284 mm (11.2-inch)
  • Mounting depth: 166 mm (6.5-inch)
  • Frame material: Heavy duty stamped steel

Shop with confidence and take advantage of

Full manufacturer’s warranty for one year

  1. 30-Day money-back guarantee

  2. Premium hand-made build quality

  3. No questions asked easy returns

  4. Customer service by phone/email

Pride J12D18 is hand-built weather-proof and tough as nails

Operating conditions
Humidity up to 90% (normal/salt-fog)
Storage temperature -20°C to 50°C (-4°F to 122°F)
Working temperature 5°C to 40°C ( 4°F to 104°F)

Additional information

Weight 9 kg
Dimensions 36 × 36 × 24 cm
Model

Woofer size

Voice coil diameter

66mm 2.6″

Voice coil material

High Temperature Copper

Sensitivity (2.83V/1m)

90 dB

Impedance

Dual 1.8-ohm

Peak power (Max)

1300W

Power (RMS)

650W

Magnet material

high quality ferrite cores

Magnet weight

3620 g (127.7 oz)

Cutout diameter

284 mm (11.2")

Mounting depth

166 mm (6.5")

Suggested sealed

0.05 m3 (1.77 cu ft)

Suggested ported

0.06 m3 (2.12 cu ft) port 200 cm2 (31 sq in) length 44.5 cm (17.5 in)

Free air resonance (Fs)

30 Hz

Excursion (Xmax) one-way BL 50%

18 mm

Voice coil DC resistance (Re)

3.8 ohms

Total speaker Q value (Qts)

0.43

Equivalent compliance (Vas)

51 L (1724.52 oz)

Efficiency (SPL 1W/1m)

87 dB

Cone area (Sd)

480 cm² (74.4 sq in)

Force Factor (BL)

17.8

Shipping label

L

Brand

Pride Car Audio

Google product category

2833

Leave a Review

Rating
Please select a star rating
Please write a review

Connect with

Facebook Twitter