Pride HP 15 Car Subwoofer 1250/2500W €274.00

 274.00

A phenomenal excursion capability is delivered by hand-built 1250W RMS – 2500W Max Power Component Pride Dual 0.8-ohm Subwoofer in order to extract maximum performance potential.

In stock

+ Compare
SKU: pride-hp-15-08 Category: Tags: ,

Description

A phenomenal excursion capability is delivered by hand-built 1250W RMS – 2500W Max Power Component Pride Dual 0.8-ohm Subwoofer in order to extract maximum performance potential.

Category: Subwoofer
Weight: 16 kg (35.3 lb)
Dimensions: LWH: 395x395x215 mm (15.6×15.6×8.5 in)
Model: Pride Car Audio HP15

15″ Sub Pride HP15 Key Benefits

COIL

Heavy-Duty Flat Wound Coppered Aluminium CCAW High Temperature Voice Coil

SPIDER

High Excursion Dual Progressive Spiders with stiched Tinsel Leads

FRAME

Die-Cast Aluminum Frame

CONE

Lightweight and stiff Real Carbon Cone and Dust Cap

MAGNETS

High-Energy VMS Vented Ferrite ceramic magnet system

WIRING

Heavy-Duty High Temperature Round wound Aluminum Ribbon Wire

Why HP-series Subwoofer?

  1. Designed for Competition SPLs

  2. Dual Flat Progressive Spiders

  3. Reduced Basket Resonation

  4. Decreased Inductive Distortion

  5. Designed for Precise, Powerful Bass

Pride 15″ HP-series Subwoofer Features

COIL

Elevated frame cooling brings air directly to the voice coil.

SPIDER

Lead wire woven into spider for added strength.

FRAME

Built with rugged cast Aluminium frame for dimensional stability and to eliminate stray magnetic fields for improved magnetic focus.

CONE

The cone design, adding targeted strength for reliable performance and sharp response.

MAGNETS

DMA optimized motor system reduces distortion.

WIRING

Proprietary all metal, radially oriented compression input terminal assembly.

SURROUND

Soft low damping rubber surround for improved transient response.

POLE

Low carbon steel top plates & one piece backplate/pole pieces, yield better magnetic flux flow and are optimized using computer analysis for maximum performance and sound quality.

The Pride HP-series Subwoofer remarkable performance evolution continues.

Pride HP15 Subwoofer is able to dissipate heat from the voice coil in a most efficient way. A hot voice coil can melt the adhesive bonds, which may lead to eventual woofer failure. The coil former acts as a heat-sink to dissipate thermal build-up on the voice coil cool during high SPL conditions.

To enhance the reliability and performance by reducing fatigue and possible shorting, in the Pride HP15 Subwoofer, Pride engineers have stitched the tinsel leads to the spider. The multipoint periodic stitching lead wires reduce the mass of the tinsel leads to spread the stress over a greater area.

  • Elevated frame cooling brings air directly to the voice coil.

  • Lead wire woven into spider for added strength.

  • Built with rugged cast Aluminium frame for dimensional stability and to eliminate stray magnetic fields for improved magnetic focus.

  • The cone design, adding targeted strength for reliable performance and sharp response.

  • Proprietary all metal, radially oriented compression input terminal assembly.

  • DMA optimized motor system reduces distortion.

  • Soft low damping rubber surround for improved transient response.

  • Model: HP
  • Woofer size: 15-inch
  • Voice coil diameter: 76 mm 3-inch
  • Sensitivity (2.83V 1m): 90.6 dB
  • Impedance: Dual 0.8-ohm
  • Peak power (Max): 2500W
  • Power (RMS): 1250W
  • Free air resonance (Fs): 28 Hz
  • Excursion (Xmax) one-way BL 50%: 19 mm
  • Voice coil DC resistance (Re): 3.2 ohms
  • Total speaker Q value (Qts): 0.39
  • Equivalent compliance (Vas): 82 L (2772,75 oz)
  • Efficiency (SPL 1W 1m): 87 dB
  • Cone area (Sd): 790 sq cm (122,45 cu in)
  • Force Factor (BL): 22
  • Voice coil material: High Temperature Copper
  • Suggested sealed: 0.07 m3 (2.47 cu ft)
  • Suggested ported: 0.1 m3 (3.53 cu ft) port 300 cm2 (46.5 sq in) length 45.72 cm (18 in)
  • Frame material: Heavy duty die cast aluminum

Shop with confidence and take advantage of

Full manufacturer’s warranty for one year

  1. 30-Day money-back guarantee

  2. Premium hand-made build quality

  3. No questions asked easy returns

  4. Customer service by phone/email

Pride HP15D08 is hand-built weather-proof and tough as nails

Operating conditions
Humidity up to 90% (normal/salt-fog)
Storage temperature -20°C to 50°C (-4°F to 122°F)
Working temperature 5°C to 40°C ( 4°F to 104°F)

Additional information

Weight 16 kg
Dimensions 44 × 44 × 27 cm
Model

Woofer size

Voice coil diameter

76mm 3"

Sensitivity (2.83V/1m)

90.6 dB

Impedance

Dual 0.8-ohm

Peak power (Max)

2500W

Power (RMS)

1250W

Free air resonance (Fs)

28 Hz

Excursion (Xmax) one-way BL 50%

19 mm

Voice coil DC resistance (Re)

3.2 ohms

Total speaker Q value (Qts)

0.39

Equivalent compliance (Vas)

82 L (2772.75 oz)

Efficiency (SPL 1W/1m)

87 dB

Cone area (Sd)

790 cm² (122.45 sq in)

Force Factor (BL)

22

Voice coil material

High Temperature Copper

Suggested sealed

0.07 m3 (2.47 cu ft)

Suggested ported

0.1 m3 (3.53 cu ft) port 300 cm2 (46.5 sq in) length 45.72 cm (18 in)

Frame material

Heavy duty die cast aluminum

Shipping label

XL

Brand

Pride Car Audio

Google product category

2833

DPD shipping price UK

65

Leave a Review

Rating
Please select a star rating
Please write a review

Connect with

Facebook Twitter