Pride HP 12 Car Subwoofer 1250/2500W €260.00

 260.00

Being the result of a huge development, the 1250W RMS – 2500W Max Power Enclosure Pride Dual 0.8-ohm Subwoofer features only the best materials and premium build quality.

In stock

+ Compare
SKU: pride-hp-12-08 Category: Tags: ,

Description

Being the result of a huge development, the 1250W RMS – 2500W Max Power Enclosure Pride Dual 0.8-ohm Subwoofer features only the best materials and premium build quality.

Category: Subwoofer
Weight: 15 kg (33.1 lb)
Dimensions: LWH: 320x320x178 mm (12.6×12.6×7 in)
Model: Pride Car Audio HP12

12″ Sub Pride HP12 Key Benefits

COIL

Heavy-Duty High Temperature Aluminium CCAW Voice Coil

SPIDER

Long-Lasting Dual Nomex Poly-Cotton Spiders

FRAME

Cast Aluminum Basket

CONE

High modulus Real Carbon Cone and Dust Cap

MAGNETS

Hi-Energy VMS Vented Ferrite ceramic magnet system

WIRING

Heavy-Duty High Temperature Round wound Aluminum Ribbon Wire

Why HP-series Subwoofer?

  1. Improved High-end Extension

  2. Improved Cone Control

  3. Integrated Tinsel Leads

  4. Stabilized Rubber Surround for Minimized Acoustic Distortion

  5. Lab tuned parameters guarantee you the top-notch audiophile quality

Pride 12″ HP-series Subwoofer Features

COIL

Solid-dome extended pole piece maintains precise voice-coil control and dissipate heat.

SPIDER

Progressive-roll spider keeps stress away from the glue joint of the spider landing for long-lasting reliability.

FRAME

Low turbulence cast Aluminum Basket improves airflow to reduce compression of the motor structure.

CONE

Competition grade paper cone and foam surround.

MAGNETS

FEA optimized motor structure.

WIRING

PSP “Parallel Series Parallel” terminal for easy wiring and impedance selection.

SURROUND

High density rubber foam surround with nylon stitching.

POLE

Vented pole yoke allows better heat dissipation and increased power handling.

Discover the difference with Pride HP12 Subwoofer, a new level in audio quality, power and impact.

Pride HP12 Subwoofer is able to dissipate heat from the voice coil in a most efficient way. A hot voice coil can melt the adhesive bonds, which may lead to eventual woofer failure. The coil former acts as a heat-sink to dissipate thermal build-up on the voice coil cool during high SPL conditions.

To increase the surface area of the cone (Sd), which is actually , Pride HP12 Subwoofer features a new way for the surround to adhere to the basket, gaining up to 25% more effective radiating cone area, and seriously improving the nominal efficiency and maximum output.

  • Solid-dome extended pole piece maintains precise voice-coil control and dissipate heat.

  • Progressive-roll spider keeps stress away from the glue joint of the spider landing for long-lasting reliability.

  • Low turbulence cast Aluminum Basket improves airflow to reduce compression of the motor structure.

  • Competition grade paper cone and foam surround.

  • PSP “Parallel Series Parallel” terminal for easy wiring and impedance selection.

  • FEA optimized motor structure.

  • High density rubber foam surround with nylon stitching.

  • Model: HP
  • Woofer size: 12-inch
  • Voice coil diameter: 76 mm 3-inch
  • Sensitivity (2.83V 1m): 87.5 dB
  • Impedance: Dual 0.8-ohm
  • Peak power (Max): 2500W
  • Power (RMS): 1250W
  • Free air resonance (Fs): 29 Hz
  • Excursion (Xmax) one-way BL 50%: 19 mm
  • Voice coil DC resistance (Re): 3.2 ohms
  • Total speaker Q value (Qts): 0.35
  • Equivalent compliance (Vas): 30 L (1014.42 oz)
  • Efficiency (SPL 1W 1m): 84 dB
  • Cone area (Sd): 480 sq cm (74.4 cu in)
  • Force Factor (BL): 22
  • Voice coil material: High Temperature Copper
  • Suggested sealed: 0.05 m3 (1.77 cu ft)
  • Suggested ported: 0.06 m3 (2.12 cu ft) port 200 cm2 (31 sq in) length 44.5 cm (17.5 in)
  • Frame material: Heavy duty die cast aluminum

Shop with confidence and take advantage of

Full manufacturer’s warranty for one year

  1. 30-Day money-back guarantee

  2. Premium hand-made build quality

  3. No questions asked easy returns

  4. Customer service by phone/email

Pride HP12D08 is hand-built weather-proof and tough as nails

Operating conditions
Humidity up to 90% (normal/salt-fog)
Storage temperature -20°C to 50°C (-4°F to 122°F)
Working temperature 5°C to 40°C ( 4°F to 104°F)

Additional information

Weight 15 kg
Dimensions 36 × 36 × 24 cm
Model

Woofer size

Voice coil diameter

76mm 3"

Voice coil material

High Temperature Copper

Sensitivity (2.83V/1m)

87.5 dB

Impedance

Dual 0.8-ohm

Peak power (Max)

2500W

Power (RMS)

1250W

Suggested sealed

0.05 m3 (1.77 cu ft)

Suggested ported

0.06 m3 (2.12 cu ft) port 200 cm2 (31 sq in) length 44.5 cm (17.5 in)

Free air resonance (Fs)

29 Hz

Excursion (Xmax) one-way BL 50%

19 mm

Voice coil DC resistance (Re)

3.2 ohms

Total speaker Q value (Qts)

0.35

Equivalent compliance (Vas)

30 L (1014.42 oz)

Efficiency (SPL 1W/1m)

84 dB

Cone area (Sd)

480 cm² (74.4 sq in)

Force Factor (BL)

22

Shipping label

L

Brand

Pride Car Audio

Google product category

2833

Leave a Review

Rating
Please select a star rating
Please write a review

Connect with

Facebook Twitter