Flared rear vented pole piece for lower back pressure and better air flow to improve power handling and lower vent noise

Pride MT 15 1250W/3500W subwoofers de voiture fr

 354.00Add to cart


Description
A phenomenal excursion capability is delivered by hand-built 1250W RMS – 3500W Max Power High SPL Pride MT Subwoofer in order to extract maximum performance potential.
Dual Voice Coil Car Subwoofer
Weight: 16 kg (35.3 lb)
Dimensions: LWH: 395x395x230 mm (15.6×15.6×9.1 in)
Model: Pride MT 15

Pride MT 15 Key Benefits
COIL
Superior Finish High Temperature Aluminium CCAW Voice Coil
SPIDER
Long-Lasting Nomex Progressive Spiders
FRAME
Die-Cast Aluminum Frame
CONE
High modulus Real Carbon Cone and Dust Cap
MAGNETS
Hi-Energy VMS Vented Ferrite ceramic magnet system
WIRING
Long Life High Temperature Round wound Aluminum Ribbon Wire
Why Pride MT Subwoofer?
Cut down back wave interference
Integrated Tinsel Leads
Dual Flat Progressive Spiders
Impressive Power Handling
Decreased Inductive Distortion
Pride 15″ MT Subwoofer Features
COIL
High temperature voice coil with spunlaced nomex insulating reinforcement collar.
SPIDER
Large spider excursion for louder bass and less distortion.
FRAME
Built with rugged cast Aluminium frame for dimensional stability and to eliminate stray magnetic fields for improved magnetic focus.
CONE
Reliable stitched surround for for more strength and cone flex minimizing.
MAGNETS
Optimized high power motor structure.
WIRING
Wiring and installation is made easier with one-sided terminals.
SURROUND
Nitrile Butadiene Rubber NBR surround for improved transient response.
POLE
Flared rear vented pole piece for lower back pressure and better air flow to improve power handling and lower vent noise.
Enjoy the remarkable performance of Pride MT-series Subwoofer and a great bargain.
Pride Subwoofer is able to dissipate heat from the voice coil in a most efficient way. A hot voice coil can melt the adhesive bonds, which may lead to eventual woofer failure. The coil former acts as a heat-sink to dissipate thermal build-up on the voice coil cool during high SPL conditions.

To enhance the reliability and performance by reducing fatigue and possible shorting, in the Pride Subwoofer, Pride engineers have stitched the tinsel leads to the spider. The multipoint periodic stitching lead wires reduce the mass of the tinsel leads to spread the stress over a greater area.

High-temp voice coil with spun-laced nomex re-inforcement collar made with ultra high temperature UHT glue.
Large spider excursion for louder bass and less distortion.
Built with rugged cast Aluminium frame for dimensional stability and to eliminate stray magnetic fields for improved magnetic focus.
Reliable stitched surround for for more strength and cone flex minimizing.
Wiring and installation is made easier with one-sided terminals.
Optimized high power motor structure.
Nitrile Butadiene Rubber NBR surround for improved transient response.
Model: MT
Woofer size: 15-inch
Voice coil diameter: 76 mm 3-inch
Sensitivity (2.83V 1m): 87.5 dB
Impedance: Dual 1.6-ohm
Peak power (Max): 3500W
Power (RMS): 1250W
Free air resonance (Fs): 28 Hz
Excursion (Xmax) one-way BL 50%: 19 mm
Voice coil DC resistance (Re): 3.2 ohms
Total speaker Q value (Qts): 0.35
Equivalent compliance (Vas): 70 L (2367 oz)
Efficiency (SPL 1W 1m): 90 dB
Cone area (Sd): 790 sq cm (122.45 cu in)
Force Factor (BL): 22
Voice coil material: High Temperature Copper
Suggested sealed: 0.07 m3 (2.47 cu ft)
Suggested ported: 0.1 m3 (3.53 cu ft) port 300 cm2 (46.5 sq in) length 45.72 cm (18 in)
Frame material: Heavy duty die cast aluminum

 354.00Add to cart